The attached modem supports only ^1 for error-control. The connection will proceed using standard async.
^1 bps is not supported by the attached modem. The baud rate has been changed to ^2 bps. Turn on the "Use reduced command set" option to avoid baud rate validation.
The result code "^1" was received in response to a connect command. Try turning the "Use reduced command set" option on.
The baud rate ^1 is not supported by this tool.
The attached modem does not respond to AT commands at ^1 bps. The baud rate has been changed to ^2 bps.
The phone number "^1" contains semicolons or other improper characters. The dialing operation may not have been successful.
The attached cable does not support CTS, which is needed for flow control when a split-speed connection is made. Some data may be lost when sending.
A split-speed (V.23) connection is not possible with the attached modem. The connection will be attempted using balanced speed.
The V-series modem was unable to deliver all the data in its buffers before the connection was terminated.
The modem reset is too slow and is interfering with setup operations. Select Modem settings and turn the modem reset feature off.
The modem did not respond to the user specified setup string of "^1".
The modem returned a result of "^1" to the user-specified setup string of "^2". Some or all of the settings may not be in effect.
